Home > Welders > MIG Welders > Millermatic^® 211 Auto-Set™ MIG Welder > Millermatic^® 211 Auto-Set™ with MVP™ MIG Welder

Millermatic<sup>®</sup> 211 Auto-Set™ with MVP™ MIG Welder

Millermatic^® 211 Auto-Set™ with MVP™ MIG Welder

All-in-one wire welder that welds 24-gauge to 3/8 in. mild steel.

Online Price: $1,103.00

Status: In stock. Usually ships in 1-2 business days.

Quantity:

Item: 907422

Free shipping for in store pickup Learn More
Only Available in the Lower 48 States

Auto-Set™

Auto-Set Go! A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the guesswork! Simply set the wire diameter, set the material thickness and start welding!

Manual Mode

Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.

Welds Thickest Material in its Class!

The Millermatic 211 Auto-Set with MVP has the highest output in its class. It can weld from 24 ga - 3/8 in. (0.8 - 9.5 mm) mild steel in a single pass on 230 V.

Spool Gun Ready Out of the Box!

Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 211 Auto-Set with MVP, the Spoolmate™ 100 spool gun allows you to weld from 18-ga to 3/8-in. aluminum.

Smooth-Start™

This technology provides a smooth spatter-free start. It's the best-starting machine in the small MIG machine category! No pop gun starts and virtually no spatter to clean up.

Multi-Voltage Plug (MVP™)

Miller's Multi-Voltage Plug allows you to connect to 120 or 230 V power receptacles without the use of any tools - simply chose the plug that fits the receptacle and connect it to the power cord.

Durable Cast Aluminum Drive System

Incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.

"Tip Saver™" Short Circuit Protection

Shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.

Processes

MIG (GMAW)

Flux Cored (FCAW)

Material Type

Mild Steel


Min 24 ga (0.8 mm)	Max 3/8 in (9.5 mm)

Aluminum


Min 18 ga (1.2 mm)	Max 3/8 in (9.5 mm) * w/ SPOOLMATE 100

General Specifications

Input Power

Requires 1-Phase power 120V, 20A, 60Hz
230 V, 24.3 A, 60 Hz

Rated Output

150 Amps at 23.5 VDC, 30% duty cycle (230 V)

90 Amps at 20 VDC, 20% duty cylce (120 V)

Welding Amperage Range

30 - 210 Amps

Wire Speed

60 - 460 IPM (1.5 - 11.7 m/min)

Net Weight

74lb (33.6 kg)

WireDiameter Capacity

.023 - .035 in (0.6 - 0.9 mm) Solid Steel
.023 - .035 in (0.6 - 0.9 mm) Stainless
.030 - .045 in (0.8 - 1.1 mm) Flux Cored

MaxSpoolSize Capacity

8 in (203 mm)

Applications

Metal Fabrication

Maintenance and Repair

Farm and Ranch

Home Repair

Garage/Job Shops

Spool Gun Option

Spoolmate 100 Series

Download Product Literature

English

Warranty

With the best coverage in the industry, Miller's True Blue® Warranty delivers unparalleled peace-of-mind.

Purchase of this item during the promotional period qualifies you for a 5% mail-in rebate. Purchase additional products equaling or exceeding $150 in the same transaction and you are qualified for the 15% mail-in rebate.

Base Price: $1,103

Price after 5% Rebate: $1,048

Price after 15% Rebate: $938

View complete rebate details

Download the rebate form
.035-.045 Gun Liner — for all M-Series Guns

$21.27

.030-.035 Gun Liner — for all M-Series Guns

$21.27

.023-.025 Gun Liner — for all M-Series Guns

$21.47

Contact Tip Adapter (2 per pkg) — for M-10, M-15, M-100, M-150 Guns

$19.38

1/2" Gun Nozzle Flush (2 per pkg) — for M-10, M-15, M-100, M-150 Guns

$20.58

.023 Contact Tip (10 per pkg) — for all M-Series Guns

$15.30

.045 Contact Tip (10 per pkg) — for all M-Series Guns

$15.30

.035 Contact Tip (10 per pkg) — for all M-Series Guns

$15.30

.030 Contact Tip (10 per pkg) — for all M-Series Gun

$15.30

Spoolmate™ 100 Spool Gun (135A) — 12 ft

$262.20

Engine Drive Adapter Cord, Full KVA

$66.50

Standard Cart/Cylinder Rack — Millermatic 140, 180, 211 and Diversions

$96.90

Premium Cart/Cylinder Rack — Millermatic 140, 180, 211 and Diversions

$170.05

Protective Cover — Millermatic 140, 180, 211

$43.70

M-100 MIG Gun (100A) for .030-.035 wire — 10-ft

$173.85

.030-.045 V-Knurl Drive Roll — for Flux Cored Wire

$20.61

MVP™ Adapter Plug for 230V/50A

$18.76

MVP™ Adapter Plug for 115V/20A

$14.35

MVP™ Adapter Plug for 115V/15A

$13.48

.024 -.035 V-Groove Drive Roll — for Solid Wire

$16.66

Material Thickness Gauge

$3.50
Rated 3 out of 5 by 1reviewer.
Rated 3 out of 5 by Parttimer Poor communication I purchased this product online on a Sunday afternoon. after 3 days I had received no communication about my order. I did not know if it went through was rejected or whatever, absolutely no after the online purchase communication. I finally called and they said it was a good order and would ship shortly. The product was exactly what I expected but expected a lot better customer service buying factory direct and paid a premium purchase price for that option without the better service April 1, 2013

1-1 of 1

Print this page

What's Included

Millermatic® 211 Auto-Set™
6 ft (1.8 m) power cord and MVP™ adapter plugs for 120V and 230V
10 ft (3 m) M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) solid wire
Dual-groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire
Factory-installed gas solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge #229895

What's Not Included

Shielding gas (for welding with solid wire [GMAW])
Flux cored drive rolls (for welding with flux cored wire [FCAW])
Spool Gun (for welding aluminum)
Small Running Gear/Cylinder
Personal safety products (helmet, gloves)

Your local welding distributor can provide shielding gas, additional welding wire and a full product offering.

Millermatic® 211 Auto-Set™ with MVP™ MIG Welder

.035-.045 Gun Liner — for all M-Series Guns

.030-.035 Gun Liner — for all M-Series Guns

.023-.025 Gun Liner — for all M-Series Guns

Contact Tip Adapter (2 per pkg) — for M-10, M-15, M-100, M-150 Guns

1/2" Gun Nozzle Flush (2 per pkg) — for M-10, M-15, M-100, M-150 Guns

.023 Contact Tip (10 per pkg) — for all M-Series Guns

.045 Contact Tip (10 per pkg) — for all M-Series Guns

.035 Contact Tip (10 per pkg) — for all M-Series Guns

.030 Contact Tip (10 per pkg) — for all M-Series Gun

Spoolmate™ 100 Spool Gun (135A) — 12 ft

Engine Drive Adapter Cord, Full KVA

Standard Cart/Cylinder Rack — Millermatic 140, 180, 211 and Diversions

Premium Cart/Cylinder Rack — Millermatic 140, 180, 211 and Diversions

Protective Cover — Millermatic 140, 180, 211

M-100 MIG Gun (100A) for .030-.035 wire — 10-ft

.030-.045 V-Knurl Drive Roll — for Flux Cored Wire

MVP™ Adapter Plug for 230V/50A

MVP™ Adapter Plug for 115V/20A

MVP™ Adapter Plug for 115V/15A

.024 -.035 V-Groove Drive Roll — for Solid Wire

Material Thickness Gauge

What's Included

What's Not Included

Follow Us:

Millermatic^® 211 Auto-Set™ with MVP™ MIG Welder